My PC does not work then what should I do? ~ DepoTech

Your PC does not work? You do not know why? You want to solve this problem? In this article I will show you some tricks that will help you solve your PC problems and start your computer normally.

There are three principal reasons for this, there is a fault with the power supply or the hardware is faulty or Windows files are damaged. Just follow these steps to resolve this issue and start again your PC normally.

1. Power supply problem

If your PC does not work when you press the light button and you hear no sound, then the problem is related to food.

Unplug your computer and connect another electrical device (a fan or radio) to the same wall outlet. If the device does not turn either, the problem comes from the electrical outlet, not the computer.

Check that all cables are connected and none of play. A poorly connected cable may be sufficient to prevent the computer from working.

2. Problem equipment

If you hear the noise from fans and hard drives but the screen does not light up, so here we can conclude that the problem is with the hardware and the causes of the failure of the latter can be numerous.

Check your computer screen

For this, the best solution is to connect your monitor to another computer! Also check that the cable connecting the screen to the tower is connected.

Listen to the beeps sequence to identify the cause of the fault

When your computer is under voltage, the BIOS makes an inventory of the hardware in the computer and performs a test to check the operation of the hardware (memory card, keyboard, hard drive ...).

If the BIOS detects an error, it will stop the system and it starts to beep, beeps as a sequence to identify the source of the failure.

Test the graphics card

Consider moving the graphics card in another computer to see if it works fine. If you hear the DVD drive spinning, some USB devices turn (mouse sensor) then the graphics card is functional.

3. Software Problem

Your computer turns on, but after the Windows logo display, it crashes.

In this case, the problem is related to a new hardware or a new program or a corrupted system file. To resolve this issue, restart your PC and press F8 in the Windows Advanced Options menu select "Last Known Valid Configuration" and hit enter.

Remember that the best support for this blog is to love and share our articles!

For more news, thank you for subscribe to the blog newsletter to its RSS feed. Please also have a look at Twitter, Google+ or Facebook for other news.